When setting up new windows, picking the correct frame design
Brand-new building and construction frames come with a nailing fin to connect the frame to the studs throughout the building and construction of the brand-new house. The replacement frame is generally the brand-new building frame minus the nailing fin.
In the west, where stucco houses are typical, makers came up with a 3rd type of frame called a retrofit frame. The retrofit frame has a fin about 2 inches broad, situated flush with the outdoors face of the window.
The old trim will no longer fit considering that the retrofit window frame measurements will be bigger in width and height than the old window frame. The factor is since an excellent quality retrofit window will have a 3 inch frame depth from the back of the flush fin to the inner part of the frame. Well, if you can set up the window versus the face of the brick or siding and still have the inner part of the vinyl frame be even more into the house than the old frame, then you can utilize the retrofit design frame.
The bottom line to keep in mind when figuring out whether to utilize a retrofit frame or a basic replacement frame is that in order to utilize the retrofit frame there requires to be less than 3 inches from the outdoors point where the flush fin will rest to the within point in the space where the old frame ends. If it’s less than 3 inches, opt for the retro, more than 3 inches, utilize the replacement frame and include trim to the outdoors in lieu of the flush fin.
Next week I am going to discuss the procedure of eliminating the old aluminum window.
Brand-new building and construction frames come with a nailing fin to connect the frame to the studs throughout the building and construction of the brand-new house. In the west, where stucco houses are typical, producers came up with a 3rd type of frame called a retrofit frame. The old trim will no longer fit because the retrofit window frame measurements will be bigger in width and height than the old window frame. The factor is since an excellent quality retrofit window will have a 3 inch frame depth from the back of the flush fin to the inner part of the frame. Well, if you can set up the window versus the face of the brick or siding and still have the inner part of the vinyl frame be even more into the house than the old frame, then you can utilize the retrofit design frame.